Digital Fire Alarm Control Panel with Floor Plan

Specification:

Power Supply: AC110V/AC220V 50/60Hz

Type: Wall-mounted/Stand alone

Stand-by battery: DC24V Sealed Maintenance-free Lead-acid Battery

Voltage alarm: Low voltage detection alerts

Charger voltage and Current: DC26.4V, 100mA~500mA, Trickle Charging

Circuit Voltage and Current: DC24V, short-circuit voltage 5V, below 32mA

External Circuit Impedance: To-and-fro below 50Ω, groud impedance above 2MΩ

Detectors: Number od differential and constant-temperature detectors unlimited; for smoke detectors(DC24V 80µA) or digital differential detectors, a maximum of 16 smoke detectors can be connected for each circuit.

Terminal Device: 10KΩ/Capacitor

Number of Indicators: 1.2 times of panel circuit

Number of Bells: 1.2 times of panel circuit

Material: 1.2mm~2.0mm Steel Plates

Main Audio: Buzzer style speaker (85dB for a distance of over 1 meter)

Remote Signal Contact: No voltage normally open contact, capacity AC 250V 3A

Characteristics:

- English LCD display: The control panel and LCD display are designed in English with guidance interface, clearly displaying the situation on site, perfectly suited for the operational habits of our countrymen.

- LCD Touch feature: LCD panel, can be optional touch function.

- Weekly automatic testing: The system has a timed self-testing function, and a weekly test that performs an inspection on each individual circuit can be set up. (If there is a fire alarm during the activation of this function, the test will be stopped automatically)

- Accumulation: Accumulation function is to prevention for false-alarm, and this function can be switch off from the control panel. Each circuit has a 2-stage accumulation function. Through the central control unit software, the accumulation function can also be deactivated for individual circuits.

- 2 Circuit LED's 4 Colors Display 5 Different Situations: Each circuit light panel module has 8 circuit indication lights. Each circuit is equipped with 2 LED's with 4 colors indicating 5 different situations, able to clearly display any situation of the circuits.

- 2-wire transfer function: The addressable module to control panel is connect by 2-wire transfer mode.

- Voice guidance: The system includes guidance speech-sounds during malfuction mode and normal mode, which gives the management personnel a clear understanding of the malfunction location and guides the operators through the operational procedures.

- Real-time print function printer: This printer can print the circuit activate and print any signal received from the sensor.

- Modular Design: Modular slot designs, with individual terminal modules for I/O. There is no need to disconnect the external lines in order to replace the malfunction circuit board, thus greatly improving maintenance and inspection efficiency.

- Communication Error Monitoring Screen: The central control unit has a communication error monitoring screen, which can directly monitor the communication status of the circuit light panel display module and I/O control communication module.

- Addressable module external function: The communication module connect to I/O module, addressable detector, each addressable I/O module and detectors can shows on the control panel's LCD by encoding address for each addressable device.